| Emissions testing: common elements to all tests |
1½ hrs |
| Conducted RF emissions (based on EN 55022, CISPR 22) |
1 hr |
| Radiated RF emissions (based on EN 55022, CISPR 22) |
1 hr |
| Mains harmonic emissions (based on IEC 61000-3-2) |
1½ hrs |
| Mains voltage fluctuations and flicker (based on IEC 61000-3-2) |
1½ hrs |
| Immunity testing: common elements to all tests |
1½ hrs |
| Electrostatic discharge (ESD) immunity (based on IEC 61000-4-2) |
1 hr |
| Radiated RF immunity using anechoic chambers (based on IEC 61000-4-3) |
1 hr |
| Fast transient burst immunity (based on IEC 61000-4-4) |
1 hr |
| Surge immunity (based on IEC 61000-4-5) |
1 hr |
| Conducted RF immunity using BCI (based on IEC 61000-4-6) |
1 hr |
| Conducted RF immunity using the EM-clamp (based on IEC 61000-4-6) |
1 hr |
| Conducted RF immunity using CDNs (based on IEC 61000-4-6) |
1 hr |
| 50/60Hz magnetic field immunity (based on IEC 61000-4-8) |
1 hr |
| Mains dips and dropouts immunity (based on IEC 61000-4-11) |
1 hr |
| Mains harmonics and interharmonics immunity (based on IEC 61000-4-13) |
1 hr |
| Three-phase unbalance immunity (based on IEC 61000-4-27) |
1 hr |
| Mains frequency variation immunity (based on IEC 61000-4-28) |
1 hr |
| D.c. supply dips interruptions and variations immunity (based on IEC 61000-4-29) |
1 hr |
| Audio frequency magnetic field testing (10Hz-50kHz) (from EN 55103-2) |
1½ hrs |
| What are Harmonised EU standards? (includes: What are Notified EU standrads?)) |
½ hr |
D-I-Y EMC product testing at low cost
(for design, development, pre-compliance, problem solving and QA –maintaining compliance in serial manufacture) |
1 day |
| D-I-Y EMC testing to generic standards by fully applying the test standards |
2 days |
D-I-Y EMC on-site testing for large apparatus
(assumes knowledge of how to apply the basic test methods in a test lab) |
1 day |
| Low-cost D-I-Y EMC test chambers |
1 hr |