| Brief review of EMC techniques
for electronic design |
2 hrs |
Basic EMC design techniques for electronic
designers
(based on the graduate course material we provided at the University
of Manchester, 2002-2004) |
2 days |
| Basic PCB EMC techniques
(1 and 2hr versions also available) |
½ day |
| Advanced PCB EMC techniques |
½ day |
| Circuit design for EMC (digital,
analogue, switch-mode, comm’s) (1hr version also available) |
2 hrs |
| Adding radiocommunications to products |
2 hr |
| Component selection for EMC (½
hr version also available)
| ¾ hr |
| EMC for cables and connectors (1hr
version also available) |
2 hrs |
| Filtering (1hr
version also available) |
2 hrs |
| Shielding for EMC (1hr
version also available) |
2 hrs |
| GHz PCB shielding |
¾ hr |
| Electrostatic discharge (ESD) protection
techniques (¾hr version also available) |
1 hr |
| Suppressing electromechanical devices (switches,
relays, motors, sliprings, spark ignition) (½hr version also
available) |
¾ hr |
| Harmonics and Power Factor Correction (PFC)
(½hr version also available)
|
1 hr |
| Surge and transient suppression (¾hr
version also available) |
1 hr |
| Immunity to dips, dropouts, sags, swells,
brownouts and interruptions (½hr
version also available) |
¾ hr |
| Suppressing emissions of voltage fluctuations
and flicker (½hr version also available) |
¾ hr |
| Protecting semiconductor sensors |
½ hr |
| Heatsinks and EMC |
¾ hr |
| Switch-mode power converters: design for
EMC |
½ day |
| Analogue design techniques for EMC |
½ day |
| Assessing electromagnetic environments and
specifying EM performance |
¾ hr |
| Assessing an electromagnetic (EM) environment |
1hr |
| The physical basis of EMC (1½
and 2 hour versions also available) |
2½ hrs |
| Electromagnetic phenomena – where they come
from and what they can affect and why (covers
10 phenomena, from 50Hz magnetic fields to GHz radiation) |
1 day |
| The relationship between signal integrity
and EMC |
½ hr |
| Pro-Audio: Designing interference-free mixing
consoles |
¾ hr |
| Pro-Audio: Audio-frequency shield current
induced noise is negligible (as long as it does not flow in the 0V
system) |
¾ hr |
| Basic principals of safe design |
1½ hrs |
| Designing and testing for product safety using
EN 61010-1:2001 |
1 day |
| Designing and testing for product safety using
EN 60950 |
1 day |
| Designing and testing for product safety and
LVD compliance |
1 day |
| Designing and testing for EMC for Functional
Safety (½ day version also available) |
1 day |
